Motorola BC796D Guida Utente Scaricare il pdf (Pagina 52)

ScanControl

One Program, Multiple Scanners, Made in USA

o Atten – The status of the Attenuate flag for the active channel.

o Priority – The status of the Priority flag for the active channel.

o Beep – The status of the Beep flag for the active channel.

o Tone – CTCSS or DCS Tone Code value for active channel.

• Talkgroup Section – Displays detail information about the currently active Talkgroup when in

Trunked Scan and Manual modes.

o Lock – The status of the Lockout flag for the active Talkgroup.

o Priority –The status of the Priority flag for the active Talkgroup.

o Beep – The status of the Beep flag for the active Talkgroup.

o Control Channel Status Bar – Displays the status of the Control Channel for the

Trunked Banks being scanned. If no Control Channel is being received the bar displays a

Red status, otherwise it displays Green.

• Search / Scan Hits Section – Provides display and function control of the Scan / Search Hits

feature of ScanControl.

o Search / Scan Hit List Window – Display list that gets populated with detailed

information about individual Scan and Search Hits. Each line contains specific

information about the Hit event. The check box □ on the left side of each Hit event can

be used to flag a particular Hit event by the user. The user clicks on the checkbox to flag

the Hit event. The flagged events are then easily distinguished from all the others in the

list when reviewed or when the list is saved to the PCs hard disk. New Hit events are

added to the top of the list and the list will hold up to the maximum number of Hits

selected by the user in the Program Options screen. If the number of Hits exceeds the

maximum then the list “rolls over” saving the newest Hits and overwriting the oldest.

The Search / Scan Hit List can now be scrolled horizontally to view the entire Hit data

row. The Hit duration is appended to the end of the data row when the transmission is

complete. Each Hit line in the list contains the following data: “Hit#” “System Name”

“Group Name” “Alpha Tag” “ID or Freq” “PL Code” “Date” “Time” “Hit Duration” “|

separator” “# of hits for this ID/Freq” “Total Time for this ID / Freq hh:mm:ss”.

o Hits Autosave Checkbox – Enables the Hit List Autosave function. If this checkbox is

checked the Scan / Search Hit List will automatically be saved to the PCs hard disk when

the Radio Control / Monitor screen is closed. This prevents the user from inadvertently

losing the Hit List events when leaving the Control / Monitoring screen. The default for

this checkbox is checked.

o Log Srch/Scan Hits Checkbox – Enables the Scan / Search Hit logging function. If this

checkbox is unchecked then no Hit event logging takes place. The default for this

checkbox is checked.

o Search Hits Autostore Checkbox – Enables the Search Hit Autostore feature.

Autostore works for both frequencies and talkgroup IDs concurrently. Search Hits listed

in the Search / Scan Hit List Window can be tagged (checked) by clicking on the check

box for the event item in the list. If Autostore is enabled the checked items will

automatically be stored in the next available Channel location or Scanlist location in

ScanControl Memory in the bank chosen in the Autostore >> Drop Down List. Search

frequency hits are stored in channel locations and Search talkgroup ID hits are stored in

Scanlist locations in the destination bank. NOTE: Tagged Scan Hits ARE NOT stored

by the Autostore feature. Scan Hits are already in ScanControl Memory in the bank so

there’s no need to store them again. Only Search Hits are automatically stored. The

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 85 86

Commenti su questo manuale

Nessun commento

Motorola BC796D Guida Utente Pagina 52

Commenti su questo manuale

Prodotti e manuali riguardandi no Motorola BC796D