Motorola AP-6511 Guida di Installazione Scaricare il pdf (Pagina 26)

AP-6511 Access Point Installation Guide

19. Set the following WAN Interface information:

• WAN IP Address/Subnet - Enter an IP Address and a subnet for the AP-6511’s WAN

interface. If the Use DHCP checkbox is selected, this field is not available.

• Use DHCP - Select the checkbox to enable an automatic network configuration using a

DHCP server. If this option is enabled, the WAN IP Address/Subnet and Gateway fields

are populated by the DHCP server.

• What VLAN ID should be used for the WLAN interface? - Use the spinner to select the

VLAN ID to associate with the WAN Interface. The default setting is VLAN 2100.

• What port is connected to the external network? - Use the drop-down menu to select the

physical port that’s connected to the WAN interface.

• Enable NAT on the WAN Interface - Select the checkbox to allow traffic to pass between

the WAN and LAN interfaces.

20. Enter an IP Address for the AP-6511’s Default Gateway on the WAN interface. If the Use

DHCP checkbox is enabled, this field is not configurable.

21. Select Next to continue to the WLAN Setup screen.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 46 47

Nessun commento

Motorola AP-6511 Guida di Installazione Pagina 26