Motorola F5207A, F5217A Guida di Installazione Scaricare il pdf (Pagina 22)

16 MW 800 Vehicle Installation Guide

The CPU box can be mounted anywhere in the passenger compartment of the vehicle that

provides adequate ventilation (see Figure 2).

It is recommended that the CPU box be mounted in a place where the PC Card slot can be

easily accessed.

In addition, attach the adhesive tapes provided in the shipping carton to the PC Card to

facilitate easy removal.

Suggested locations, in order of preference, are: on the CPU box mount, on the prisoner cage,

under the dashboard, in the console, or under the seat (not in the direct path of the vehicle

heater air flow). If the CPU box is mounted on the base plate of the mount assembly, it must

be mounted using the CPU box mount.

The CPU box mount can be affixed to the base plate in two possible orientations (see Figure

8 and Figure 9):

1. On the base plate, directly under the keyboard tray (see Figure 9).

2. On the base plate, using different mounting holes in the opposite direction to the

keyboard tray (see Figure 8).

MW 800 GPS Antenna

To install the GPS antenna, perform the following steps:

Step 1. Drill a hole into the mounting surface for the antenna post.

Step 2. Release the nut and the flat washer from the antenna post and insert the post into the

hole.

Step 3. Secure the post with the flat washer and the nut.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 54 55

Nessun commento

Motorola F5207A, F5217A Guida di Installazione Pagina 22